@Kevin_Z after all, i get again the "Not Reachable" mode / state. I did the reset and connected the AX53 to the network like in the guide. In addition, i have 220 "other mesh devices" in my network

@Kevin_Z The situation now: The AX53 is connected to another port on the main router directly, using a different cable than on the begining. My laptop is connected to the lan port of the Ax53. The...

@lisukup It was not connected before through a switch. Now i connected it through a switch only to try another LAN port of the main router. After 2 days i have the same issue. The swtich model -...

@Joseph-TP (Satellite) Repeater RE190 )))((( AX55 (Main Router) ------ AX53 Satellite On the same cable, there was an IP Camera working before, directly connected to the main router (about 9 meters)....

Hello, I have an EasyMesh network with an AX55 V1 as the main router, and an RE190 and AX53 V1 as satellites. The AX53 is connected via Ethernet backhaul to the AX55. At random moments (every 2-3...