Hello @EricPerl, thank for your explanation. You should be careful with statements like "Your understanding of VLANs is, to say the least, incomplete". I'm not talking about setting up VLANs. For me,...

Hello @GRL, thank you for the detailed feedback. In my in-house environment, I have to assign two VLAN's to ONE ER605 port. I have to access LAN2 and LAN3 because both IP ranges are required on the...

Hello @EricPerl, I am aware of the poor solution, but my in-house network imposes some limitations. Yes, I am also aware that I need two translations when accessing LAN1 to LAN3, which is very...

Hello @EricPerl, thank you for your information and questions My main purpose of NAT is not to reduce IP exhaustion. Yes, the IP ranges should be separated. No, not every device can communicate with...

Hello @Clive_A, thank you for the quick response to my question. I know the basic concept for a one-to-one NAT, but I have a special requirement: In an existing network with a Fritz!Box, an ER605 and...

Hello, how can I configure ER605, which was hierarchically under an other ER605? My configuration: 1. Internet -> Fritz!Box -> ER605-1 -> ER605-2 -> Dedicated mini-computer with IP 10.11.1.11 2. I...