@Wayne-TP I found the following on Home Assistant forum: "The HA Matter integration supports hvac_action if the device provides the “ThermostatRunningState” attribute, so this isn’t a limitation in...

@Summertm In Kasa app, you see "Heating to XX°C" even if this target value is lower than measured and the valve is actually closed. But Tapo app in such situation would display "Heating inactive" or...

@Martin01342- Only with third party solution connecting devices of different vendors, e.g. Home Assistant. TP-Link does not offer physical controllers (knobs etc.), NO/COM switches or OpenTherm...

@Jirinak82 My observations do not match what Wayne says. When TRV is in ON (idle) status and measured temperature is above set target, it looks like the valve is fully closed. Otherwise I would have...

@WyczynowyBanan Witam rodaka! Disconnect all devices from the hub and remove them from both apps. Reset KH100 hub and connect it to Kasa app only(!!!), then add TRV's and thermometers there. Check if...

@Wayne-TP Yes, it does. I configured KH100 hub and KE100's in Kasa app first (in January) and then synced it to Tapo app in the latter's settings. I did not add or remove devices (hub, TRVs,...