Hi @Micha72 VPN is a router's feature. You can configure it via the controller, but the controller is just a management interface to configure the router. Here you can see some guideline about VPN...

Hi @Godlike66 It's on the User Management page: 1. choose Site view, go to Settings > Authentication > Portal, and choose Hotspot > Local user Then you will see User Management; click it. On the...

Hi @GregVLAN You can either tear off the EAP label or scribble out the MAC address with a marker. But remember to record the MAC address before doing so. However. this can only prevent the simplest...

Hi @GregVLAN Yes, I have been thinking of writing a guide like this for a long time but haven't had the time. I saw your post yesterday and thought it was time!

Background: This post provides a configuration guide on how to configure 802.1X to allow only specific EAPs to get a network, thus blocking any other device from getting a connection from the same...

Hi @guarana As for my understanding, for example, if you want the HQ WLANs to be the Default WLAN group of the site, you can directly modify the default WLAN group name Default to HQ WLANs, and add...