StariaaLV1Online
Following: 0Followers: 0
Forums/ Routers
2024-10-24 15:31:33
Re:Site To Site Auto or Manual IPSec not working
@bmall Hi not really still not working for me till this day have any ideas or alternative configuartion you can give ?
0HELPFULS
Forums/ Routers
2024-05-27 11:02:09
Re:Site To Site Auto or Manual IPSec not working
This still didn't work for me, im guessing your using DDNS ive set one up for the remote site but not for the main site, i don't think it makes a different if use a dns or IP but it might be a BT...
0HELPFULS
Forums/ Routers
2024-05-27 10:56:18
Re:Site To Site Auto or Manual IPSec not working
I had a read it seems not sure if it correct that is but an administrator stated "IPsec VPN servers are not possible behind a Smart Hub 2 due to it only supporting TCP and UDP pass-through. Even with...
0HELPFULS
Forums/ Routers
2024-05-24 14:28:42
Re:Site To Site Auto or Manual IPSec not working
@MisterW they were enabled by default it seems so yeah its enabled
0HELPFULS
Forums/ Routers
2024-05-24 14:02:42
Re:Site To Site Auto or Manual IPSec not working
@MR.S Hi You can see below Remote Site Main Site Another point for the NAT in the omada controller, should they be forwarded to the IP of the omada controller or the gateway? I just changed the...
0HELPFULS
Forums/ Routers
2024-05-24 13:59:20
Re:Site To Site Auto or Manual IPSec not working
Hi This has been changed Main Site BT Router Lan 192.168.0.1 TPLink Router: 192.168.1.1 Remote Site BT Router 192.168.4.0 TPLink Router: 192.168.3.1
1HELPFULS
12