@Hank21 Actually found a good conversion chart that can help others in the future, so in terms of the EAP670 or similar device. You can take the range and figure out based on chart:

There is the option if changing the dbm value (2ghz...max 25dbm and on 5ghz...max of 28dbm). is it just a matter of dividing that number to get a "Low/Med/High" baseline? I would like to keep 5ghz at...

@Hank21 Thank you...had one other question if you can help and its in regards to transmit power levels in standalone mode without controller. There is the option if changing the dbm value (2ghz...max...

Hi all...just need to clarify the channel width setting. I have v2.6 hardware if it matters. If you leave channel width slection to auto, it shows (20/40/80/160). I manually have the channel set to...

@Hank21 Thank you!

Hi.....just picked up a 670 in which the newer (slimer) model was sent (Hardware v2.6). Once thing I noticed is that the v1 has slotted back cover and this newer version does not. Any concern with...