Hi @Houseofdreams_, When you mentioned the printer had a "static VLAN60 IP", did you access the printer configuration and save the ip address in the printer itself, or did you reserve that IP for the...

Sorry @CarloPH, I did indeed miss those details. 🤦♂️Could the TL-POE170S be bad? Does the SG2008P have 30W surplus to power the SG2005P-PD with one camera and bypass the TL-POE170S for a test? Any...

@Skewett, forgot to say the splitter is the opposite of an injector, so input is data/power via network cable and output is data on a network cable with power on seperate low voltage wire.

@Skewett, TP-Link makes this splitter, but it's not outdoor rated so it's up to you to enclose it. You would also need to verify it can withstand any tempature ranges where you plan to install it....

@Skewett, seems there's enough power, so SG2005P-PD can't or doesn't know to supply passive power. You might try an outdoor gigabit 802.3at/af 12V splitter to power the 215 using the DC barrel plug....

Hi @Skewett, How are you powering the SG2005P-PD? The EAP215-Bridge requires 11.5W and the EAP225 requires 12.6W (little less in EU), so total is 21.4W. If you're not using the 802.3bt type 3/4 POE...