@KimcheeGUN No, I'm fine with single client performance at 600-800mbps, however, I'm also expecting 2 clients can download/upload 600-800mbps from my servers that was connected to my tl-sg3210XHP-M2...

@KJK the switch statistics on Omada is not real time, it gave me total transmitted data in a time range and it's similar to what I see in iperf client/server. I don't think the switch is the issue...

@KJK What's the best way to check the reading on the port? Do I need to use the cli on the switch? I don't see per port traffic data in Omada.

To clarify, the reading on the iperf app on my iphone and ipad if not run simultaneously is about 600-800. If I run both client at the same time the sum of the bandwidth is still 600-800 which means...

@KJK the reading is on my client (iphone and ipad) both using the iperf3 application. Iphone: iperf3 -c server1 Ipad: iperf3 -c server2 server1 and server2 are both connected directly to...

I have two EAP670 currently connecting to my TL-SG3210XHP-M2 using the 2.5 poe+ port. These two EAP works find on both 2.4ghz and 5ghz band and can give 600-800 gbps on my phone if I'm in the same...