@guyd2 Thank you for answering, but using that guide : 1. I followed it step by step and didn't find "disable" DHCP on router alone ( and I had to reset it to factory defaults in order to unbind it...

@Clive_A Hi, For an example - CAM VLAN, can be turned off or on, I get the same result - NVR which is connected via ethernet cable and 2 WiFi cams (to WiFi assigned to VLAN ), and I don't see any...

Hi, This is my hardware setup: ER605, OC200, SG2428P, and some AP. I started to play arround with VLANs- I created 4 instances as part of understanding the use of it. There are some great tutorials...

I'm trying to create a vlan. I'm using a ER605, OC200, and SG2428P with 3 AP. All works great! Native lan is 192.168.0.1 with a wifi called "dv2" whom not designated for a specific vlan. my new vlan...

@guyd2 Yes, it is Hikvision issue (cams should be at 192.168.254.x), regardless your IP. Solved Guy

@KJK As a quick test - I took a simple 4 port switch ( as the role of NVR ) connected it to Omada's port12 (and assigned it to CAM). Camera was powered using external 12V (since it is not POE now)......