intgomLV1Online
Following: 0Followers: 0
Forums/ Deco
2024-08-01 12:58:29
Re:Deco XE75 Regular Disconnects after Automatic Firmware Update
I'll watch out for LED behaviour next time it fails. All XE75 units connect wirelessly to each other - only the main XE75 uses a LAN cable to connect to the fibre termination point in my home.
0HELPFULS
Forums/ Deco
2024-07-31 20:51:10
Deco XE75 Regular Disconnects after Automatic Firmware Update
Subject says it all. I have 3 XE75 units covering my home with the main plugged directly into a Vodafone fibre-to-the-premises socket. Units received an automatic firmware update and then at least...
2HELPFULS
Forums/ Tapo Smart Camera
2024-04-04 18:43:17
Tapo C520WS - Outdoor Camera Wi-Fi Range
Hi Everyone. I purchased 3 of these cameras, two for the back of my property and 1 for the front. The 2 cameras at the back work well and connect with strong signals to my Deco XE75, which is part of...
0HELPFULS
Forums/ Tapo Smart Camera
2024-02-14 08:16:25
Re:Powering 3 C510W cameras from 1 adaptor
@Summer_S Thanks for your response. I'm not very good with electrical circuits, but my electrician has suggested using one adaptor to power the 3 cameras, I'm guessing by cutting the wires and using...
0HELPFULS
Forums/ Tapo Smart Camera
2024-02-11 11:20:20
Powering 3 C510W cameras from 1 adaptor
I'm considering buying 3 of these cameras to cover front, side and back of my house. My electrician was going to power them from outside light circuits but noticed the 9V DC adaptors, meaning they...
0HELPFULS