@leobotes Hey CPE710 is the latest model with 23dBi antenna. If you have a line of sight, of course, it would be a good choice.

@IveM Hey, yes you can, with two considerations (distance and height of installation). The only thing is the distance between your house and garage, which I assume shouldn't be too much. If they are...

@JoeSea A note on the EAP653, it is a lot lower broadcast power than the EAP650. Hi, do you have a reference for that? EAP653 has the same radio as EAP650, the only difference is that EAP653 package...

@Shoresy Well, I assume that when you configured the LAG, you connected two cables from the router to the switch, then when you adopted it,the switch reset and you have a loop in your network. So the...

@Shoresy Hi, as far as I know, there is no way you migrate the configuration of the switch to the controller as the management process is different. Everything you want to achieve should be...

@jchowdown In addition to the previous post, if you don't want to reset, you need to ensure that the switch IP address has not changed. You can also do a ping to determine if it's a GUI problem or...