Forums/
Routers
2023-02-23 07:48:06
@kdurigan Are the two IPsec tunnels using IKEv1? Have you tried IKEv2? And have you tried Local ID Type to select Name?
0HELPFULS
Forums/
Routers
2022-12-23 08:31:34
@antonioabb Your configuration is fine, Policy Routing will allow traffic to go to the WAN you set up first, and there will be very little traffic after another WAN. Only when the primary WAN goes...
0HELPFULS
Forums/
Routers
2022-12-13 08:55:47
@antonioabb So Policy Routing may be a solution for you. what's the Port Status in Load Balancing -- Online Detection after you set a policy routing rule.
0HELPFULS
Forums/
Routers
2022-12-13 00:53:03
@antonioabb If you want the rules you set to work for a period of time, you can select timing, which sets a time period in Preferences--Time Range. If you want the rules you set to work all the time,...
0HELPFULS
Forums/
Routers
2022-12-13 00:44:35
@chuq Have you try to set a Policy Routing rule to let all the traffic go through the first wan? It's strange that it won't work when one wan down.
1HELPFULS
Forums/
Routers
2022-12-12 01:58:14
@antonioabb In Load Balancing--Link Backup, set low ping wan as primary wan and high ping wan as backup wan.
0HELPFULS