Hi, i have the same dsl modem on 250mb telekom tarif with the settings: Dsl modulation type: auto, Annex type: auto, Bit swap: uncheck, Sra: uncheck, Upbo: uncheck, Dt line optimization: check, 35b...

Hello, i use the vr2100v with o2, and i had this problem to. To me was that i used the 1.1.1.1 dns instead the O2 dns. After i changed back to automatic dns provided from O2, it worked again. Check...

@Marvin_S Hi, After I installed the firmware, IPv6 is now operational. When will the official firmware be updated?

My isp is telekom vdsl2 and vlan 7. Setting is dhcpv6. The openvpn server is on. I did not do anything on the settings from over a year. After updating, I noticed that IPv6 is not working. After...

@Marvin_S Hi Marvin, the isp networking is dual-stack and i receive the Connection and the IPv6 ip. The problem is on lan side on the iPhone device. It transfer the ip address , but the router ip...

Hello i have a problem with the ipv6 on LAN side after the firmware update. Ipv6 is not working anymore. Sometimes it works few seconds after is gone ( packet loss on ipv6 ping) on the wan side is...