@rakrouki First recommendation without further information would be to try a different cable. If you don't have another one long enough to reach the EAP location, take the EAP down and bench test it...

I built a WiFi network for the RV Park we are staying in long term. This consists of an EAP610 OD wired to a TL-SG2210MP with an OC200 Controller. The switch in turn in wired to a Unifi UDM Pro...

@Fozzie Bear OC200 will save you some stress. I originally had our EAP610 OD Root and 4 EAP225 OD Remotes running from PC software. OC200 at $100 was easily justified.

Fix the orientation setting to match this device. The LED is on the side of this device and if you choose that side as the orientation in the map, the heat pattern appears to be off 90 degrees....

@John333 I know you wanted to avoid it, but seems like the ideal solution would be the Starlink in pass-through to a more robust router that supports the SIP for the VOIP. I am very unfamiliar with...

@Aehs01 what @d0ugmac1 said. "Is it 100% required I would expect to have the access point connected via ethernet for full functionality?" If it is in standalone mode then YES. If you make it part of...