@CarloPH Seems odd. I have an EAP610 Outdoor V1 (US), and the latest firmware is 1.20. If yours is in fact an EAP610 Outdoor V1 (US), it should be reporting that 1.20 is available.

@DirtySanchez I need to know the make / model of Router 1 in order to assist more.

@Kaizoku My first move would be to get away from 2.4Ghz for the bridge between the two structures and then on the side where 2.4ghz is needed for the camera, come off the LAN port of the CPE to a...

@DirtySanchez I believe it would work as long as the unwired CPE broadcasts an SSID and Router 1 has the ability to join that network (WDS Bridging). I have done similar by joining my router to a...

@Fae clicking on the link provided shows "thread deleted". Also checking for firmware update on the controller shows it is up to date despite being a lower version than the one mentioned.

@HenrikBage You really need a complete topology map to show what you are doing. I see you have two routers, which potentially means two DHCP servers, different subnets, etc. Getting the two CPE210...