Forums/
5G/4G Wi-Fi Routers/MiFi
2017-01-10 19:42:53
blackmetal wrote i have same problem with pptp, can you connect and bypass pptp also ?thanks I haven't tried pptp since we don't use it. My advice would be to contact support and ask them to send you...
0HELPFULS
Forums/
5G/4G Wi-Fi Routers/MiFi
2017-01-05 21:32:47
Solved for IPsec! I flashed firmware "MR200_V1_Beta_ 160706" today, which was sent to me by TP-Link support. Traffic through our IPsec tunnel is now possible. The firmware version that caused the...
0HELPFULS
Forums/
5G/4G Wi-Fi Routers/MiFi
2016-12-24 16:34:40
newfoundglory wrote all fixed? They sent me two files, but I won't be getting a chance to test until next month. Will let you know. Happy holidays!
0HELPFULS
Forums/
5G/4G Wi-Fi Routers/MiFi
2016-12-22 15:58:11
newfoundglory wrote Its none of those. Its beta 161026, file starts Archer_MR200v1_0.9.1_1.1_up_boot(161026) Right, back to the support team then. I hope I'll be getting an answer this time. Thanks!
0HELPFULS
Forums/
5G/4G Wi-Fi Routers/MiFi
2016-12-21 16:05:07
newfoundglory wrote Hello I have been using a beta update for the MR200, which you should find is available through tp link support. It did fix the problems I was having with l2tp and ipsec. I...
0HELPFULS
Forums/
5G/4G Wi-Fi Routers/MiFi
2016-11-02 15:48:57
Same problem, even after upgrading firmware to V 5/9/2016. Passthrough is enabled. Tunnel is established (welcome banner is shown) but no traffic whatsoever. Can't even Google with tunnel up....
0HELPFULS