Hi @terziyski Yea - all IP address on the LAN subnet (except from the Default Gateway) should be blocked for Guest WiFi clients - But I tell you that not how it works! First of all I see no Guest...

Hi @terziyski Thanks a lot for your prompt answer. Now having cleared that the network topology is OK and "the way to do it" I have a more serious question: Looking at the Official AX55 V1 Firmware...

Hi, Just to be sure: What is TP-links recommendation for setting up EasyMesh with Ethernet Backhaul when using two AX55 WiFi devices both in Access Point mode and situated in an existing switched LAN...

Hi @Czmazel Check your DHCP server setup (static addresses etc). Why? Because around every 30-35 seconds (the local AX55 DHCP servers refreshes its DHCP lease from the main DHCP server (if you got...

Hi @Czmazel Just one small observation. Are you having a cable problem on LAN2 since it's running at 100Mbps and not at 1000Mbps or did you connect a legacy device with a 100Mbps Ethernet card? If...

Hi @Marvin_S Thanks for your assistance, So the pre-release (Archer AX55(EU)_V1_1.3.3 Build 20240628) has now become the official release including issues detected during the pre-testing period) I...