RouterA is ok, I reconfigured the PPTP server and this solved the problem. But on RouterB it didn't work neither the factory reset and manual setting. The difference is that RotuerB have more S2S...

What is strange that only PPTP client can access to LAN2 (if it connects to Router1). If I try wireguard (connect to Router1) it doesn't see LAN2. But I'm new in Wireguard may I missed something, I...

S2S settings on router2: Mode: LAN-to-LAN Remote Gateway: WAN IP of router2 WAN: WAN Local Network type: Network Local Network: LAN Remote subnet: 192.168.10.0/24

Hi @Clive_A, than you for your reply! "BTW, you can still access the local LAN of one of the sites? I mean the C2S connection is okay? " Yes, it is okay on both sides! "Delete the VPN profile and...

Hi, I have two ER605 routers which connect two remote offices together and they are worked fine so far. I did a fw upgrade from 2.1.2 to the latest 2.2.4 in 3 steps: 2.1.2 -> 2.2.2 -> 2.2.3 -> 2.2.4...

@Somnus Thank you for your reply! The solution was that I deleted some unused settings from the configuration and this helped. It is strange because these settings were in disabled status.