@Virgo I'm afraid I don't full get what you say. Do you mean the utilization is maybe based on the WAN port speed of the ER605? WAN Port is connected to a FritzBox with GigaBit: So if 1 GBit would be...

Hi, I was always wondering about the little utizilization of my WAN shown in the Dashboard: This is a setup being used by 2 people with about 13 devices, so there are idle times, but I tested it,...

@Hank21 Wanted to give you a brief follow up on this because it didn't work out in the end. The statistics are measured for about half of the wired sessions, the sessions that were recorded seemed...

@Felix81 So, I did the test I talked about in my last post: Validated that "online detection" config is still set to resolve Google DNS within the router Disconnected LTE behind WAN / LAN 1, after...

@Felix81 Maybe I'll give it a shot re-importing the router having that setting disabled and hoping the current manual config (resolving DNS servers) persists within the configuration...

@Felix81 So.... I took the router out of controller mode, it reseted to factory settings, I configured the first WAN / LAN port to WAN, this was the only configuration I performed. Disconnected the...