@soupastars supposedly vpn should work as how you configured it. if you config it subnet to be 10.94.3.1/30, then it only routes this traffic in the vpn tunnel. probably static route would work. How...

@ishanjain28 but what you configured is not correct. i understand that your router only receives ingress with a tag frame. settings 99 to untagged should be fine. as you can set pvid on your router...

@ishanjain28 this is where you connect your router is on interface gigabitEthernet 1/0/1 EAP is on interface gigabitEthernet 1/0/2 then where is the VM? from the switch, can you use diagnostics to...

@andrexweb andrexweb wrote @Tedd404 Hello, I had already found a similar article about the speed test. Why the speedtest results don't match the total bandwidth of multiple WANs with the load balance...

@Gamienator Gamienator wrote @Tedd404 I hoped someone here can tell me this. Via SNMP Monitoring I get this interfaces, which I don't know what they are and so on then what does your software say...

@kirkdb speed test was removed/discontinued several versions ago. that's what I learned from them. i assume it could be the API cost or API technical issue or inaccurate results from the speedtest.net