@Virgo I managed to get traffic through from network B to network A but not from A to B which is what I need. Network A is going to be the remote site and network B has all the servers All settings...

@Virgo The connections shows as being established under the "Insight" tab on both controllers. All settings are the same except the ip address section. I'll toss up screenshots of both a bit later...

@Virgo Unfortunately this is a site to site over IPSEC using R605 on both sides. In this simple setup, network A is 10.10.10.0/24, WAN is 192.189.2.0/24 and network B is 172.16.36.0/24. The client on...

First off, finding straight forward documentation on this is a bit of a challenge. The issue I am having is I can ping the LAN port IP of the other R605 when site-to-site VPN is connected but not...

I'm in the process of simplifying our home/office network as I'll be relocating temporarily 2500km away. Opted for the TP-Link Omada system as it looked simple, reasonably complete (all components...