Hi There, I think that the mainly reason may be the distance between the two AP. And actually, as long as it didn't infect your normal use, I think the ping test won't need to pay too much attention....

Hi Claypot, 1. I recommend to deploy it a little bit lower. Because if you installed the EAP110-Outdoor on the roof top, the horizontal plane of the wireless signal are in totally different level of...

Hi Henry, If you want to login EAP's web page from other place. You can: 1. Fix the EAP's IP and default gateway. If the gateway in your EAP's network is 192.168.0.1, you can set your EAP's IP as...

Hi Borsti, Accord to your description, you problem is: when you enable portal authentication (hotspot), and then connect to the Wi-Fi, some of the AP will reboot automatically? I recommend: 1....

Hi bytzak, EAP320 support two kinds of power supply methods: 802.3at PoE and 12V/1.5A AC/DC adapter. If you want to power EAP320 using PoE, you can use T2600G-28MPS , TL-SG3424P or any other 802.3at...

Hi dubsy, You can open your old EAP Controller, and in System -> Backup & Restore, click Backup, and the EAP Controller will create a configuration file. And then you can Restore the configuration...