Forums/
Wi-Fi Routers
2015-12-13 19:23:21
The TD-W8980 uses an Atheros chip for 2.4GHz wireless and a Lantiq chip for 5GHz wireless. https://wikidevi.com/wiki/TP-LINK_TD-W8980_v1 The E900 uses Broadcom chips for wireless....
0HELPFULS
Forums/
DSL Modem Routers
2015-12-12 02:44:24
Check antennas are properly screwed on all the way til firm if you have a revision of the TD-W8960N with removable antennas.
0HELPFULS
Forums/
Wi-Fi Routers
2015-12-12 02:39:40
If wireless co-existence is causing the D7s' wireless AP to only use one channel (20MHz) it could be the cause. W ireless co-existence is a software feature. Wireless co-existence is also sometimes...
0HELPFULS
Forums/
Wi-Fi Routers
2015-12-12 02:08:29
It is an 802.11AC router it's just that the 5GHz wireless webgui settings leave a lot to be desired. I doubt it is an oversight, more likely Qualcomm Atheros or TP-LINK decided that said settings...
0HELPFULS
Forums/
Wi-Fi Routers
2015-12-11 03:16:13
If the 2.4GHz is working then it can't a wireless button fault. The 5GHz wireless chip may be faulty so the driver isn't correctly initialising thus, driver isn't started and region isn't displayed.
0HELPFULS
Forums/
Wi-Fi Routers
2015-12-11 03:05:21
The Archer C7 v1 is not wifi certified with no settings for wireless mode or channel width under 5GHz wireless in the webgui....
0HELPFULS