@shadowwild Try one more thing -- Change the MGMT VLAN of the CPE (both CPEs) to tagged. I think you can do that on the Network Menu if I remember right. Once you do that see if your current...

@sssp Try it like this EAP245 <===> (access port vlan 40) <====>switch (trunk port vlan 40 allowed, native vlan 1) <===> CPE710 <=====> CPE710 <====> (trunk port vlan 40 allowed, native vlan 1)...

@shadowwild Is this how its setup, trying to visualize EAP245 <===>switch <===> CPE710 <=====> CPE710 <====> switch <=====> Omada Controller Can you make sure VLAN 40 is allowed across all Trunk...

@shadowwild How are your switch ports configured (the ones connected to the CPE's). Are they configured as Trunk Ports or Access Ports? If they are configured as Trunk Ports then the WIFI AP's should...

Setting up CPE710, have 2 CPE710. one running in AP mode and the other in Client mode. My use case is the following. Need the 2 CPE701 to connect to each other (done and working). Need to send...