Forums/
5G/4G Wi-Fi Routers/MiFi
2021-08-05 04:33:36
@Wynand Onemesh and Deco two different product for mesh networking. You need to range extender with onemesh funciton. I use RE305v3 and it works fine.
0HELPFULS
Forums/
5G/4G Wi-Fi Routers/MiFi
2021-07-27 17:01:30
@vigneshs Beta version worked for me (tested again after your messages). Check with different browser to download file and upload to router, may be corruption in transfer process.
0HELPFULS
Forums/
5G/4G Wi-Fi Routers/MiFi
2021-07-26 13:24:35
@jmcl1 No, no BAND selection option in MR200v5. Only Onemesh enable/disable option, that too works with tether app only. You can test beta firmware on browser without SIM only. Yasin
0HELPFULS
Forums/
5G/4G Wi-Fi Routers/MiFi
2021-07-16 13:17:53
@TP-Link I dont know if MR200 supports CA, I tested on beta and it doesn't work on my data SIM. Should I swap SIM Connection: I should have checked my network performance before buying MR200 (MR200...
0HELPFULS
Forums/
5G/4G Wi-Fi Routers/MiFi
2021-07-15 18:22:06
@HSG I do get speed between 27.9Mb to 51.1Mb on MR200 and on same network using iPhone XR (LTE) i can reach 70.9Mb to 220Mb. MR200 uses single Band and XR uses Carrier Aggregations (3 bands). Tested...
2HELPFULS
Forums/
Wi-Fi Routers
2021-07-13 06:30:18
@Archdv I experienced severe heat with AX20 and noticed the bottom doesn't have enough ventilation (AX10 looks similar) for air circulation, positioned router vertical with enough ventilation for air...
0HELPFULS