@aubey Might want to take a look at this link. It is for an EAP225 ceiling, but the poe specs are the same for the EAP225-Outdoor. They appear to be saying the switch needs to be able to handshake...

When you adopt a device into the controller it needs to adopt the configuration settings that exist in the controller, so any configuration made in standalone mode will be erased. There are...

@aubey Seems to be a handshaking issue between the switch and the EAP225-Outdoor. The EAP225 is a low voltage (24VDC) poe compared to the EAP245's 48 VDC. The switch manual does indicate: "If...

@nrgbistro Try this guide at the beginning of the following link and it might help to read through the comments. Link

@immec This should work if you don't have anything significant blocking the signal between the two EAP225's. The wireless link requires them to be operated in mesh mode.

@Kashf You need to create a permit ACL rule. This can be by IP or MAC address of the two hosts and can also be limited by port number.