@Virgo Thanks for the answer. But this seems to be a completely different problem. Omada expects the Mgmt VLAN to be 1 at first and only shows the VLAN1 interface although communication is done at...

Hi. Can anyone tell me why this is happening? There is no loop in the network. Port 1/0/25 is the only connection to the switch SG3428X.Also, there are no broadcasting or flooding devices (e.g. there...

Hi. I couldn't find any of my SG3xxx and SG2xxx switches in the list of the Omada controller for adoption since version 4 of the controller software. After some intense testing, I found the...

@Kris0x0000 I assume that the 3428X is not managed by Omada. In this case you have to setup all the VLANs on each port manually. VLAN 1 is activated by default on all ports, so you have access to the...

@graham-b Dear Graham. Thanks for sharing. And congratulations for finding a working solution although it is quite surprising. From my understanding, the cameras and the NVR transmit untagged...

@Kris0x0000 Yes, it does. Works great here. 1. Have you configured the VLAN at the port you are using to access the switch and set the IPs correctly? 2: Are there any ACLs configured?