I tried running this on channel 100, it would change to 36 or 132 too often due to radar detections. So I thought I might as well run channel 132 80Mhz wide... No go. Can only do channel 132 @ 40Mhz...

@PBGBBB2020 What command are you running in iperf client for the speedtest? And is the iperf server wired to the network?

@jmanderson - I had the same issue. What I did was to set the R605 IP address in standalone mode, before having the controller adopt it, because my IP pool is different to the default of the R605....

Can some confirm if the SG3424P is compatible with the Omada controller? Or is there a link to switches that are Omada compatible? Thanks.

So I have a working network with a different router. Is it possible to set up the R605 on my current network just to provide VPN access to the LAN? I.E. no routing, just a VPN server. Thanks,

I got the OC200 to adopt the R605. That was fine. The DHCP pool set up is different. On my MikroTik I have a range of ...100-254, and I set static IPs outside this pool. This is what I set on the...