I think IF-MIB::ifDescr.1037 = STRING: default/eth1.4094 IF-MIB::ifDescr.1038 = STRING: default/eth1.4093 are the two WAN interfaces, 1038 = WAN, 1037 = WAN1/LAN. But I wouldn't stake my life on it

I made a setting in standalone mode back then, which is not accessible via controller mode (SNMP / Get trusted host IP). So my idea was to forget the router and re-adopt to get rid of this setting....

@lucky99eu Have you tried with vlan yet ? Other way: If your webserver provides two LAN ports (2 lans or 1 lan & 1 wifi) you can use different ports for your private and public network.

@lucky99eu The first IP is the network identifier, the last is the broadcast IP. The useable IPs in between have to be configured on the router's lan interface or a seperate vlan. One of these (which...

I'm new to the ER605 and EAPs. The interfaces are showing download bytes/packets and upload bytes/packets which are increasing. But I wasn't able to find out within what time range. Is there any...

I initially had the ER605 in standalone mode, set up SNMP with a single IP as trusted host. Tested with MIB Browser on that host, everything was fine. Then I adopted the router with Omada Controller....