Region : UnitedKingdom

Model : TL-WR843ND

Hardware Version : Not Clear

Firmware Version :

ISP : BT

Hi there

My TL-WR843ND arrived which I bought with the intention of using as both a switch and a wireless access point.

Right now it just works as an ethernet switch.

I cannot access the configuration settings using

192.168.1.1
192.168.0.1
tplinklogin.net

This is how my network at home is set up

BT HomeHub 3.0 receives internet access and is configured by 192.168.1.254

BT direct physical connections: 1) Family PC, 2) Gigabit Switch

Gigabit switch physical connections: 1) TL-WR843ND, 2) two PCs

TL-WR843ND physical connections: 1) various media devices, 2) my laptop I used to try and configure the device.





(Edit: This image came out too small but I think the description above it should help)


My reason for buying this product was because the WiFi strength is so poor in the part of the house I am in so I connect anything that has an ethernet port to my gigabit switch (although I did run out of ports). Unfortunately, I would like to use the wifi with my phone as would my mum with her laptop. There are many brick walls between the BT Hub and us. My plan was to have our own connection in the part of the house we're in but I cannot get this working. I am in the WISP mode on the switch and have tried a few resets on the back.