Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > HELP! Archer NX200 says connected to 5G in Tether, but no access from client devices.

< All Threads

HELP! Archer NX200 says connected to 5G in Tether, but no access from client devices.

mrbouffant

Wednesday - last edited Friday

Posts: 3

Helpful: 3

Solutions: 0

Stories: 0

Registered: 2025-01-01

HELP! Archer NX200 says connected to 5G in Tether, but no access from client devices.

Wednesday - last edited Friday

Tags: #Network Connectivity #Installation #Tether App Related #2.5 Gbps

Model: Archer NX200

Hardware Version:

Firmware Version:

Hey.

I recently got an NX200 to connect to the newly upgraded 5G tower nearby. Cell provider is EE in the UK.

Problem is, although I have it all set up and Tether claims the device is connected to the internet, when I connect any client devices (phone, PC) to the wifi, it then says there is no internet connection.

I've tried it in Smart mode and as separate 2.5/5 wifi networks with no luck.

I also upgraded the firmware to the latest (it is a V1 device).

Using the NX200 admin interface I tried setting Network Mode to 5G and 5G/4G/3G and no luck.

The SIM works in a TP Link 4G LTE router without an issue. It also works in a Samsung S21+ giving a >200Mb 5G connection without issue.

I feel like either the device is broken or I am doing something super dumb. Any help gratefully received!

With thanks

--mrb

1 Accepted Solution

David-TP

Thursday - last edited Friday

Posts: 12948

Helpful: 1834

Solutions: 1312

Stories: 9

Registered: 2020-04-14

Re:HELP! Archer NX200 says connected to 5G in Tether, but no access from client devices.-Solution

Thursday - last edited Friday

@mrbouffant

Hi, Thank you very much for the feedback.

Could you please refer to this link here:

Archer NX200 Can't Access Certain Websites or Only Receives an IPV6 Address

And manually create the following profile to se e whether it helps

PDP Type: IPv4
APN Type: Static
User name: eesecure
Password: secure
Authenticate Method: None

Wait for your reply and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.

Recommended Solution

4 Reply

myag

LV2

Wednesday

Posts: 36

Helpful: 14

Solutions: 1

Stories: 0

Registered: 2021-06-23

Re:HELP! Archer NX200 says connected to 5G in Tether, but no access from client devices.

Wednesday

@mrbouffant

Have you tried 4G/3G mode ?

mrbouffant

LV1

Wednesday

Posts: 3

Helpful: 3

Solutions: 0

Stories: 0

Registered: 2025-01-01

Re:HELP! Archer NX200 says connected to 5G in Tether, but no access from client devices.

Wednesday

Yes. Like in 5G and 5G/4G/3G mode it says connected to the internet in Tether and in the router admin page, but any device connecting over wifi says internet not available and will not access any websites.

David-TP

Thursday - last edited Friday

Posts: 12948

Helpful: 1834

Solutions: 1312

Stories: 9

Registered: 2020-04-14

Re:HELP! Archer NX200 says connected to 5G in Tether, but no access from client devices.-Solution

Thursday - last edited Friday

@mrbouffant

Hi, Thank you very much for the feedback.

Could you please refer to this link here:

Archer NX200 Can't Access Certain Websites or Only Receives an IPV6 Address

And manually create the following profile to se e whether it helps

PDP Type: IPv4
APN Type: Static
User name: eesecure
Password: secure
Authenticate Method: None

Wait for your reply and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.

Information

Helpful: 1

Replies: 4

HELP! Archer NX200 says connected to 5G in Tether, but no access from client devices.

HELP! Archer NX200 says connected to 5G in Tether, but no access from client devices.

Information

Voters 1

Tags