NX200 don't work with 5G speed and drops all the time

NX200 don't work with 5G speed and drops all the time

NX200 don't work with 5G speed and drops all the time
NX200 don't work with 5G speed and drops all the time
2024-11-04 10:21:43 - last edited 2 weeks ago
Model: Archer NX200  
Hardware Version: V1
Firmware Version: Archer_NX200(EU1)v1_1.0.0_3.0.0_UP_BOOT_2024-03-09_01.34.18

I bought this router after the archer MR600 which worked perfectly. 
I installed the TIM sim, but the line keeps dropping and the speed despite indicating 5g is lower than 4g.
It drops all the time. download is max 54k, upload 15k or lower, impossible to use.

THe iPhone in the same place works perfectly in 5G and I must use it in tethering again since this router don't work.
Also keeps breaking the web connection.

Tried the officil firmware and the italian firmware, but nothing happen.
I don't understand, I can't solve it.

Do you have any solution? Or a new firmware?

Otherwise I will send back this product to Amazon.

Regards

  0      
  0      
#1
Options
1 Accepted Solution
Re:NX200 don't work with 5G speed and drops all the time-Solution
2024-11-07 12:04:15 - last edited 2 weeks ago

  @MicheleZ 

Hi,

Thanks for posting on TP-Link Community.

 

Please test if the issue happens on both 2.4G and 5G. You can change to another channel and channel width.

If the wired devices also have the unstable issue, please also change LAN DNS on the router to Google DNS.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:NX200 don't work with 5G speed and drops all the time-Solution
2024-11-07 12:04:15 - last edited 2 weeks ago

  @MicheleZ 

Hi,

Thanks for posting on TP-Link Community.

 

Please test if the issue happens on both 2.4G and 5G. You can change to another channel and channel width.

If the wired devices also have the unstable issue, please also change LAN DNS on the router to Google DNS.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 293

Replies: 1

Related Articles