X50 PoE massive network instability - help much appreciated
Hello
I helped a friend install the network with the Topology shown below. I was virtually copying my own network, as I have the Deco X50s and they are working like a dream.
Unfortunately my friend is massively struggling and almost every day the decos can switch to red and then randomly start working again.
Initially we thought we had created a loop, but this is now the topology of the network. Some things seem to be performing better now, but the TV stopped connecting (even though it is connected by LAN into an 8 port switch).
Is this topology ok? Is there anything else I should be cautious or consider about the network or anything you think could be causing instability?
Also, his Network looks a lot different to mine, it is showing the satellite decos not connected by the ethernet back haul (living room is his main Deco).
Thanks in advance for any help :)
I am afraid you did not read carefully the forum topic I provided.
The problem is between Main Deco and Vimin 16 port PoE siwtch. The wired link between them is broken. All symptoms point to it.
You should check what is with that wired link.
