Home Network Community > All Threads > Archer GE800 various problems
< All Threads

Archer GE800 various problems

Archer GE800 various problems

Archer GE800 various problems
Archer GE800 various problems
2024-11-29 12:52:48 - last edited 2 weeks ago
Tags: #Wi-Fi 7 #Network Connectivity
Model: Archer GE800  
Hardware Version: V1
Firmware Version: 1.1.5

 

 

Hello, I am reporting some problems encountered in using GE800 and I wanted to ask you if there is a possibility that they will be solved in the future.

 

1) Data trasmission in wireless mode: I connected two computers with wifi 7 network cards to the GE800, one with Intel BE200 and the other with Qualcomm QCNCM865, and I find the transmission speed very low and wery fluctuating, This occurs bith the individual 5 and 6 GHz bands and in MLO mode.

 

2) The client list shows incorrect speeds on devices connected in MLO mode.

 

3) Very high bufferbloat even when QoS is enabled

 

4) My ISP gives me an IPv6 address in /48 mode usin the same PPPoE session as IPv4, but the router always reports it as /64. Is it a limitation of the router?

 

Thanks

 

Valerio

  1      
 
  1      
 
#1
Options
6 Reply
Re:Archer GE800 issues
2 weeks ago

I report two other problems detected while using IPv6:

 

- I can't access the Roon server (Linux system installed on Intel NUC) remotely (using the Roon ARC app created specifically for remote access);

- some apps on the Samsung QE32W50AEU TV are slow in operation or do not work mat all ( Prime Video for example).

The two problems do not occur when using only IPv4.

 

Regards

  0  
  0  
#3
Options
Re:Archer GE800 issues
2 weeks ago

@Doc_Octopus 

 

Thank you for reporting issues in the community.

 

1. Aside from the two Wi-Fi 7 adapters (Intel BE200 and Qualcomm QCNCM865), do you have any phones that support Wi-Fi and test the connectivity with the GE800?

 

2. The Tx/Rx Rate of the clients will be optimized in future updates.

 

3. Was this result also tested on the computers with Intel BE200 or Qualcomm QCNCM865? Please make sure you're installing the latest driver for the adapters.

 

4/5/6. For the IPv6 issues, I'm afraid they need to be analyzed further.

 

I would like to escalate the case to our support engineers and they will follow it up via email.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:Archer GE800 issues
2 weeks ago

  @Kevin_Z 

 

1- Yes I have other wifi devices, phones, smart tvs etc. But form the phone (iphone 15 pro ma) I can't transfer files from a server and my internet connection is 200 mbit;

2- Thanks

3- THis test was done with computers with wifi 7 cards. The results are the same as those done from iphone. The drivers are the latest.

4- Ok

 

Regards

 

Valerio 

  0  
  0  
#5
Options
Re:Archer GE800 issues
2 weeks ago

@Doc_Octopus 

 

Thank you very much.

 

Could you please let me know your Internet provider and the bandwidth you are subscribed to?

 

When connecting the Intel BE200 to the 6G or 5G network, what is the link speed, and how does it fluctuate? Could you please share some testing results?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#6
Options
Re:Archer GE800 issues
2 weeks ago

  @Kevin_Z 

 

My internet subscription is a VDSL2 connection with speed 200/20 mbit, effective 190/20 mbit.

I did some tests using the 5 GHz band, the 6 GHz and MLO wireless connection.

For each of these I also did the test with QoS enabled and disabled (spoiler: bufferbloat is better with QoS off). Qos is set to 170/18 mbit.

The network card is an Intel BE200 with the latest driver (23.100.0.4)

 

- Let's start with 5 GHz band with QoS

 

 

- 5 Ghz without Qos

 

- 6 GHz with Qos

 

- 6GHz without QoS

 

- MLO is a disaster, often the speed slows down to below 100 mbit in download

 

- MLO with Qos

 

- MLO without QoS

 

Regards

 

Valerio

  1  
  1  
#7
Options
Re:Archer GE800 issues
2 weeks ago

@Doc_Octopus 

 

Thank you very much for providing all the testing details.

 

I've escalated this case to our support engineers, and I hope they will find a solution soon. Please check your registered email for updates.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#8
Options

Information

Helpful: 1

Views: 239

Replies: 6

Tags

Wi-Fi 7 Network Connectivity
Related Articles
Archer GE800 facing constant issues
203 0
EasyMesh Archer GE800 >> AX6000
225 0
Port forwarding not working correctly with new Archer GE800
498 0
Archer GE800 , Range and speed
649 0
GE800 Router Only Recognizing 2.5G GPON as 1000Mbps Full Duplex
532 0
Archer GE800 SFP+ Interface Problem, No Internet Connection
185 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.