Home Network Community > All Threads > ARCHER AX55 AX3000 + TP-LINK Range Extender RE605X
< All Threads

ARCHER AX55 AX3000 + TP-LINK Range Extender RE605X

ARCHER AX55 AX3000 + TP-LINK Range Extender RE605X

ARCHER AX55 AX3000 + TP-LINK Range Extender RE605X
ARCHER AX55 AX3000 + TP-LINK Range Extender RE605X
2024-09-09 07:57:30 - last edited 2024-09-12 06:45:17
Tags: #EasyMesh
Model: RE605X  
Hardware Version:
Firmware Version:

Hello forum,

I have router AX55 AX3000, as I understand it is mesh compatible. IF I buy RE605X extender mesh supported, and plug it to the wall, but I have super low wifi signal, also I have LAN outlet on the wall which is connected to router, so if I connect that LAN cable to RE605X and repeat wifi signal from cable, but not wireless, will all mesh system work properly?

Tried calling TPLINK support center but no one is answering :D Please help, dont want to risk buying extender if it will not work taking signal from cable as IT would thru wireless.

Eligijus

  1      
 
  1      
 
#1
Options
1 Accepted Solution
Re:ARCHER AX55 AX3000 + TP-LINK Range Extender RE605X-Solution
2024-09-09 11:45:38 - last edited 2024-09-12 06:45:17

  @Eligijus92 

 

If you use an ethernet cable you should put RE605X in AP mode - it doesn't support mesh ethernet backhaul.

RE315v1 supports this feature - details.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
5 Reply
Re:ARCHER AX55 AX3000 + TP-LINK Range Extender RE605X-Solution
2024-09-09 11:45:38 - last edited 2024-09-12 06:45:17

  @Eligijus92 

 

If you use an ethernet cable you should put RE605X in AP mode - it doesn't support mesh ethernet backhaul.

RE315v1 supports this feature - details.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
Re:ARCHER AX55 AX3000 + TP-LINK Range Extender RE605X
2024-09-09 12:06:19 - last edited 2024-09-09 12:13:07

  @terziyski 

So if I understood correctly this extender will take ethernet signal from wall LAN outlet and make it same SSID meshed wifi in that area?

I want to be sure if it will not create additional wireless SSID for me, and later I have to recconect to better signal SSID, I want to keep same SSID and not to recconect anywhere else just to have same wireless name at my second floor as first floor, and repeat all signal not from wifi but from LAN outlet upstairs.

Attached picture, which as I believe says it will not mesh my wifi just will create additional acces points when I repeater signal from LAN, and then I have to recconect manually all the time to that specific accespoint going upstairs?

If this extender is doing that please confirm again, and im going straight to shop laugh

So this option taking signal from cable and repeating as wifi is called ethernet backhaul?

Best Regards,

Eligijus

  0  
  0  
#3
Options
Re:ARCHER AX55 AX3000 + TP-LINK Range Extender RE605X
2024-09-09 12:23:48 - last edited 2024-09-12 11:34:18

  @Eligijus92 

 

Thats correct. RE315v1 as well as AX55 support Easymesh with an ethernet backhaul which will allow you to have a mesh network with the same SSID throughout your premisses - details. They both should be connected with an ethernet cable to build an Easymesh with an ethernet backhaul.

In fact you can use any other wireless router that supports Easymesh with ethernet backhaul to achieve the same - details.

To benefit from the seamless roaming your wireless devices should support 802.11k/v protocols as well - details.

 

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  1  
  1  
#4
Options
Re:ARCHER AX55 AX3000 + TP-LINK Range Extender RE605X
2024-11-29 19:47:24

  @terziyski 

I bought RE315v1 ,but unfortunately if I plug ethernet cable it doesnt mesh, it creates additional SSDI with -EXT.....
Mesh option working only if  you extend/repeat signal thru wifi :(

  0  
  0  
#5
Options
Re:ARCHER AX55 AX3000 + TP-LINK Range Extender RE605X
2024-11-30 16:12:45

  @Eligijus92 

 

Make sure that RE315 is with the latest FW release.Reset RE315 to its factory settings by pressing the reset button for about 10 seconds.

Add the RE315 in the Easymesh network using WPS method and then connect the ethernet cable to RE315.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  1  
  1  
#6
Options

Information

Helpful: 1

Views: 617

Replies: 5

Tags

EasyMesh
Related Articles
TP Link Range Extender
310 0
Confirm Warranty Period of TP-Link RE605X Range Extender
525 0
AX3000 (Archer AX55) as a wireless repeater / extender?
16160 0
TP Link Range Extender with access mode selected
348 0
TP link wifi range extender
677 0
Range extender Tp-Link set up
1171 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.