Connecting Onemesh (Archer A6 v3.0) to Easymesh (AX 12)
Hey guys!
So i just bought a new router which is my Archer AX12 and I was hoping to mesh my two routers (Archer A6 3.0 and Archer AX 12) together, because before when i ordered this new router, i researched and saw that ONEMESH and EASYMESH is compatible with each other.
But now i cant seem to connect the two routers :<
Archer A6 3.0 is quite old and i tried searching this forum to resolve this like, setting the AX12 to sattelite mode so that A6 onemesh will detect the easymesh but it doesnt work :<
Can someone help me about this? Thank you in advance!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
OneMesh itself doesn't support connecting another OneMesh router as satellite. A OneMesh network can only be expanded by TP-Link Range Extenders and certain TP-Link Powerline adapters.
However, there is a trick someone here has discovered some time ago.
An EasyMesh router can be added as a satellite to an OneMesh main router by using the WPS method.
(Set the Archer AX12 to "Satellite" mode. Then press the WPS button of the Archer A6 V3 and within two minutes press the WPS button of the Archer AX12.)
- Copy Link
- Report Inappropriate Content
OneMesh does not support wired connections, it only works wirelessly. If you connect the two routers by cable, then either it will not work at all or the network will become erratic.
- Copy Link
- Report Inappropriate Content
Hi,
OneMesh itself doesn't support connecting another OneMesh router as satellite. A OneMesh network can only be expanded by TP-Link Range Extenders and certain TP-Link Powerline adapters.
However, there is a trick someone here has discovered some time ago.
An EasyMesh router can be added as a satellite to an OneMesh main router by using the WPS method.
(Set the Archer AX12 to "Satellite" mode. Then press the WPS button of the Archer A6 V3 and within two minutes press the WPS button of the Archer AX12.)
- Copy Link
- Report Inappropriate Content
Hi,
Thanks a lot for this!
I'll try it later, Also may i ask if this mesh system will still work when two of them is connected to the modem (wired)?
Like I'm planning to mesh my two router while two of them is connected through LAN cable, so that two of them will get full speed.
Thanks for your reply in advance!
- Copy Link
- Report Inappropriate Content
OneMesh does not support wired connections, it only works wirelessly. If you connect the two routers by cable, then either it will not work at all or the network will become erratic.
- Copy Link
- Report Inappropriate Content
@woozle
Thank you for that!
last question, i tried managing my AX12 byt clicking manage on my A6 onemesh but it said that "
Rejected request under RE mode."
Any information on how i will manage my AX12 while its in mesh? thank you!
- Copy Link
- Report Inappropriate Content
Managing TP-Link routers while they are working as EasyMesh Satellite is not supported at present. The only exception is the Archer AX55 V1.
Edit: But even on the AX55 V1 that supports logging into its management webpage, there is actually not a lot that can be managed. So, you are not missing out on much. You can get a glimpse of the available menus in section 7 of this post here https://community.tp-link.com/en/home/forum/topic/682288 .
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 752
Replies: 5
Voters 0
No one has voted for it yet.