vx1800v connection speed issue in 2.4GHZ band
HELLO, when i am using 2.4ghz band my xiaomi phone built in wifi section shows my connection speed is 286Mbps , while it should show 574 Mbps at 2.4 GHz ....i dont have this problem in 5GHZ band and in 5ghz it shows 1201 Mbps ... is this a bug or something like this ? i tested this in my pc with windows 11 64bit and again same issue ,i also tested 40mhz Channel Width and didnt work..... here is screen shot from my phone :
https://file.io/phPZbiJArLB7
Also i have another quesion my hardware version is v1 ...is there any new update (frimware or hardware) for this product ?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, thanks for posting question here.
Hardware version can not be changed, as hardware usually is fixed and can not be changed.
Firmware can be updated but yours has been the latest.
From its specifications, we can see 1201 Mbps at 5 GHz, 574 Mbps at 2.4 GHz, which is maximum wireless signal rates/negotiatied speed
I can understand your worries, but maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead, and 3) client limitations, including rated performance, location, connection, quality, and client condition~
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, thanks for posting question here.
Hardware version can not be changed, as hardware usually is fixed and can not be changed.
Firmware can be updated but yours has been the latest.
From its specifications, we can see 1201 Mbps at 5 GHz, 574 Mbps at 2.4 GHz, which is maximum wireless signal rates/negotiatied speed
I can understand your worries, but maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead, and 3) client limitations, including rated performance, location, connection, quality, and client condition~
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 249
Replies: 2
Voters 0
No one has voted for it yet.