Home Network Community > All Threads > Archer AX6000 in Access Point mode sends DHCP REQUEST every 30ish seconds
< All Threads

Archer AX6000 in Access Point mode sends DHCP REQUEST every 30ish seconds

Archer AX6000 in Access Point mode sends DHCP REQUEST every 30ish seconds

Archer AX6000 in Access Point mode sends DHCP REQUEST every 30ish seconds
Archer AX6000 in Access Point mode sends DHCP REQUEST every 30ish seconds
2024-08-06 00:05:32 - last edited 2024-08-08 09:14:09
Tags: #Access Point Mode
Model: Archer AX6000  
Hardware Version: V1
Firmware Version: 1.3.2 Build 20230906 rel.52143(5553)

Like other users, I have a problem that the TP Link Archer AX6000 tries to renew its DHCP lease every 30 seconds. It is set to access point mode. The DHCP server is running OpenWRT 23.05.04. 


2024-08-05 18:03:07 DHCPC INFO [9015] receive ack from server with ip 10.0.4.39, options(serverid=10.0.0.1;lease=14400;subnet=255.255.224.0;router=10.0.0.1;dns=10.0.0.1 10.0.0.1;)
2024-08-05 18:03:07 DHCPC INFO [9015] send select request with options(cliid=01/cc:32:e5:86:a6:b0:;)
2024-08-05 18:03:07 DHCPC INFO [9015] 1/2 lease passed, enter renewing state

2024-08-05 18:02:33 DHCPC INFO [9015] receive ack from server with ip 10.0.4.39, options(serverid=10.0.0.1;lease=14400;subnet=255.255.224.0;router=10.0.0.1;dns=10.0.0.1 10.0.0.1;)
2024-08-05 18:02:33 DHCPC INFO [9015] send select request with options(cliid=01/cc:32:e5:86:a6:b0:;)
2024-08-05 18:02:33 DHCPC INFO [9015] 1/2 lease passed, enter renewing state

2024-08-05 18:01:59 DHCPC INFO [9015] receive ack from server with ip 10.0.4.39, options(serverid=10.0.0.1;lease=14400;subnet=255.255.224.0;router=10.0.0.1;dns=10.0.0.1 10.0.0.1;)
2024-08-05 18:01:59 DHCPC INFO [9015] send select request with options(cliid=01/cc:32:e5:86:a6:b0:;)
2024-08-05 18:01:59 DHCPC INFO [9015] 1/2 lease passed, enter renewing state

 

I know the AX6000 is old, but it's new to me. I just set it up, and it was an upgrade from my Deco P9. 

  0      
 
  0      
 
#1
Options
2 Reply
Re:Archer AX6000 in Access Point mode sends DHCP REQUEST every 30ish seconds
2024-08-07 09:41:52

  @Andrew_Z 

 

Hi, thanks for posting question here.

May I confirm OpenWRT 23.05.04 is installed by yourself?

It is suggested to remove the third-software from the router and confirm again.

 

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
  0  
  0  
#2
Options
Re:Archer AX6000 in Access Point mode sends DHCP REQUEST every 30ish seconds
2024-08-07 15:57:21 - last edited 2024-08-07 15:57:53

  @Marvin_S 

Sorry, I was unclear. I did not make any unusual modifications to the TP-Link device. The TP-Link Archer AX6000 (access point/DHCP client) is running the latest vendor firmware, while OpenWRT is running on a Belkin RT3200 (router/DHCP server). 

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 210

Replies: 2

Tags

Access Point Mode
Related Articles
Archer AX6000 in Access Point mode sends DHCP REQUEST every 30ish seconds
657 1
Issue with Archer C64 on access point mode
277 0
Archer BE800 sends DHCP Requests every 30 seconds
449 0
Access Point Mode or Router Mode
1082 0
Problem with access point mode
509 0
Archer C6 v2 not working in access point mode
1822 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.