Hi all

Looking to get 2 units of X50-POE for my apartment. I have a Cat 6 cable wired to each point in the ceiling where I intend to mount it, and there are no power sockets available, thus the POE option. 
 

I would also like to connect both units together with another cat 6 cable, and use a Ethernet backhaul setup in router mode.

The modem will connect to the POE switch, and 1 Ethernet cable to each unit's 1Gbps/POE port to power it, AND an additional Ethernet cable between Unit A's 2.5Gbps and Unit B 2.5Gbps port.  
 

Would this set up work? 
 

thanks!