Home Network Community > All Threads > MU-MIMO keeps switching off and 2.4ghz wifi issue
< All Threads

MU-MIMO keeps switching off and 2.4ghz wifi issue

MU-MIMO keeps switching off and 2.4ghz wifi issue

MU-MIMO keeps switching off and 2.4ghz wifi issue
MU-MIMO keeps switching off and 2.4ghz wifi issue
2024-05-03 19:28:38 - last edited 2024-05-03 19:30:20
Tags: #Firmware Update #Network Connectivity #MU-MIMO
Model: Archer BE800  
Hardware Version: V1
Firmware Version: 1.1.1 Build 20240227 rel.33191(4555)

Hi

 

I noticed there was a firmware update for my router today when I checked.

 

Before I updated, OFDMA+MU-MIMO was activated on my wireless settings.

 

Since the firmware update, it reverted to OFDMA only.

I can select the option for OFDMA+MU-MIMO but after saving the settings, it reverts back to OFDMA only.

 

I have tried rebooting the router and trying to select the option again, to no avail.

 

Is there a problem with MU-MIMO and its been temporarily disabled in the latest firmware update?

I'm asking because the only reason I went on the router settings is because twice now since I got the router, after about 20-30 days of uptime, all my 2.4ghz wifi devices disconnect (I had no problem for about 4 months after purchase, its been doing this the last 2 month). The 2.4ghz wifi network is showing full strength but when I try to connect it says unavailable/unable to connect. A reboot solves this but it happens again 20-30 days later.

 

P.s the WiFi issue was on the previous firmware version that come shipped with the router. I havent tried the WiFi on this new firmware version, however I'll have to wait 30 days or so to fully test it. Its just the MU-MIMO issue at the moment.

 

Many thanks

  0      
 
  0      
 
#1
Options
7 Reply
Re:MU-MIMO keeps switching off and 2.4ghz wifi issue
2024-05-03 22:26:57

Just noticed on another thread about the firmware bug causing the MU-MIMO drop out.

 

However the 2.4ghz problem might still be a problem.

  0  
  0  
#2
Options
Re:MU-MIMO keeps switching off and 2.4ghz wifi issue
2024-05-06 12:37:46

  @Marvin_S I just updated to 1.1.1 Build 20240409 rel.49203(5553) on a different TP-Link Product and looks like it wasn't patched. It still removed me out of MU-MIMO after updating the firmware. Thanks!

  0  
  0  
#4
Options
Re:MU-MIMO keeps switching off and 2.4ghz wifi issue
2024-05-28 06:58:38 - last edited 2024-06-06 09:11:15

  @LiamG91 

 

Hi, the new firmware is on the way to fix the OFDMA+MU-MIMO issue, please stay tuned and check the firmware update from the official website.

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
  0  
  0  
#6
Options
Re:MU-MIMO keeps switching off and 2.4ghz wifi issue
2024-06-03 10:24:31

  @ZandaaTV 

 

Hi, are you still using this product. We have confirmed that the new firmware will fix the issue and it will be released in the next two weeks.

Thanks for your patience and waiting!

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
  0  
  0  
#7
Options
Re:MU-MIMO keeps switching off and 2.4ghz wifi issue
2024-06-23 16:55:02

  @Marvin_S 

 

Thanks, I have updated to the new firmware and mu-mimo is fixed.

 

I haven't noticed any issues since with the 2.4ghz wifi (but my be800 is showing 17 days uptime), but did you guys notice any problems with the previous firmware in regards to the 2.4ghz wifi showing as full strength, but unable to connect any devices to it and the devices that were connected to it, disconnected. This happened after about 30 days of uptime and a reboot fixed it, but then it would happen again after another 30 days. Just wondered if you guys noticed an issue with it that's been fixed in this firmware update?

  0  
  0  
#8
Options
Re:MU-MIMO keeps switching off and 2.4ghz wifi issue
2024-06-23 17:03:09

Just noticed my previous post.

 

It was probably the factory firmware that was causing the 2.4ghz problems. The next firmware where the mu mimo was messing up, I didn't notice any problems with the 2.4ghz, so maybe the 2.4ghz problem was rectified in the firmware update that caused the mu mimo problem. So hopefully both problems have now been rectified in this new update.

  0  
  0  
#9
Options
Re:MU-MIMO keeps switching off and 2.4ghz wifi issue
2024-06-24 01:43:57

  @LiamG91 

 

Hi, thanks for your update.

I did not receive same feedback as yours before. Please do not worry, if there is still wireless performance issue, please feel free to update here.

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
  0  
  0  
#10
Options

Information

Helpful: 0

Views: 657

Replies: 7

Tags

Firmware Update Network Connectivity
MU-MIMO
Related Articles
MU-MIMO keeps switching off
1283 0
BE800 MU-MIMO issue... STILL!
138 0
MU-MIMO support
935 0
MU-MIMO Dissapears
306 0
MU-MIMO can't be enabled on BE800
785 0
Deco x60 MU-MIMO Issue (iPerf Test)
1337 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.