Home Network Community > All Threads > AX55 EasyMesh Fixed IP
< All Threads

AX55 EasyMesh Fixed IP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX55 EasyMesh Fixed IP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AX55 EasyMesh Fixed IP
AX55 EasyMesh Fixed IP
2024-04-09 18:50:04 - last edited 2024-04-10 03:27:55
Model: Archer AX55  
Hardware Version: V1
Firmware Version: 1.3.1 Build 20240129 rel.57815(4555)

Hi,

Updated two AX55 V1 routers with (TW/EU/US) firmware 1.3.1 Build 20240129 rel.57815(4555).

 

Main Router#1 was on 192.168.0.251 in access point mode, and then activated EasyMesh - worked fine - still on 192.168.0.251.

Factory reset of router#2 (was on 192.168.252) to act as Satellite and added it to the mesh. Rebooted Satellite and Ethernet BackHaul was active seen on the Main Router.

 

But how do I change the Static LAN IP of the Satellite Router away from 192.168.0.2. This IP address conflicts with existing fixed IP adresses on my network.

I know I could re-arrange my entire LAN IP scope but I kind of think that TP-Link should NOT dictate which IP address should go where on my LAN.

 

2nd question: If my device (currently on 192.168.0.2) would have been active at the time of factory resetting of the Satellite Router - would that caused the Satellite Router to get another LAN IP Address?

 

Please advise!

 

zEnterHacker

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:AX55 EasyMesh Fixed IP -Solution
2024-04-09 19:48:53 - last edited 2024-04-10 03:27:55

  @zEnterHacker 

Forget it!

 

The LAN address of the satellite can be controlled by making a STATIC MAC Address Pair in the DHCP server of my main Firewall.

I'm using Access Point Mode on Main Router and not using the local AX55 DHCP server.

 

Thanks for reading :-)

zEnterHacker 

Recommended Solution
  0  
  0  
#2
Options
5 Reply
Re:AX55 EasyMesh Fixed IP -Solution
2024-04-09 19:48:53 - last edited 2024-04-10 03:27:55

  @zEnterHacker 

Forget it!

 

The LAN address of the satellite can be controlled by making a STATIC MAC Address Pair in the DHCP server of my main Firewall.

I'm using Access Point Mode on Main Router and not using the local AX55 DHCP server.

 

Thanks for reading :-)

zEnterHacker 

Recommended Solution
  0  
  0  
#2
Options
Re:AX55 EasyMesh Fixed IP
2024-04-09 21:25:35

  @zEnterHacker 
 

DHCP address reservation is a good way to fix a clienmt IP address by tis MAC address and perferct workaround in your case.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#3
Options
Re:AX55 EasyMesh Fixed IP
2024-04-10 03:27:47

  @zEnterHacker 

 

Thanks for the update. Glad to hear that you've solved the problem.

 

Alternatively, the 1.3.1 firmware of AX55 V1 has supported managing satellite router, so you could also use the satellite router IP address to login the satellite device web interface to see if there is an option to set a static IP address for it directly.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#4
Options
Re:AX55 EasyMesh Fixed IP
2024-04-10 07:48:29 - last edited 2024-04-10 08:06:15

  @Sunshine 

 

Well if that was the case - then I would certainly have found it :-)

 

The ability to manually set the IP Address via WEB GUI disappears of as soon as the router is set into Satellite mode.

There is also no way for that using the WEB GUI on the Main Router - so IMHO Static DHCP is the only way.

 

zEnterHacker

  0  
  0  
#5
Options
Re:AX55 EasyMesh Fixed IP
2024-04-10 08:53:51

  @zEnterHacker 

 

Thanks for the feedback, we will record it and report to the related department to evaluate adding it on the satellite router.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 819

Replies: 5

Related Articles
AX55 V2.0 Easymesh implementation
1195 2
Official EasyMesh Firmware for Archer AX55 is NOW available
36314 17
AX55 EasyMesh performance over traditional AX55 Access Points
1604 0
Archer AX55 EasyMesh in AP mode
2050 0
[EasyMesh] AX55 not able to set as Satelite
1231 0
Archer AX55 EasyMesh different wifi channel
105 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.