Home Network Community > All Threads > Connect devices directly with ethernet cables with Deco Mesh routers
< All Threads

Connect devices directly with ethernet cables with Deco Mesh routers

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Connect devices directly with ethernet cables with Deco Mesh routers

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Connect devices directly with ethernet cables with Deco Mesh routers
Connect devices directly with ethernet cables with Deco Mesh routers
2024-03-11 20:29:21 - last edited 2024-10-16 07:49:50
Tags: #Network Connectivity #Deco Ethernet Backhaul #Connection Preference
Model: Deco X50  
Hardware Version:
Firmware Version:

Hi,

I have a device that doesn´t support wi-fi connection, only ethernet cable. Is there anyway I could directly connect this device to a Deco mesh router with an ethernet cable?

Please, can you also provide me a list of the Deco mesh router models that could support this requirement?

Thank you in advance.

Regards,

 

Carlos. 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Connect devices directly with ethernet cables with Deco Mesh routers-Solution
2024-03-11 21:21:46 - last edited 2024-03-12 11:50:53

  @cballock 

 

You can connect such device to any available Ethernet port of any Deco unit in your WiFi mesh: both Main Deco and Satellite Decos. Deco Ethernet port behaves like LAN Ethernet port of networking switch.

 

Deco mesh does not like devices that have static IP address configured on them. There are very few types of devices which require configuration of IP address on device, but they do exist. As long as device can request IP address dynamically from the router, you should have no issues hardwiring it to Deco unit. You can set IP reservation for device in Deco app, if you need static IP address for device.

Mentioning that to cover all possibilities.

 

Recommended Solution
  2  
  2  
#2
Options
4 Reply
Re:Connect devices directly with ethernet cables with Deco Mesh routers-Solution
2024-03-11 21:21:46 - last edited 2024-03-12 11:50:53

  @cballock 

 

You can connect such device to any available Ethernet port of any Deco unit in your WiFi mesh: both Main Deco and Satellite Decos. Deco Ethernet port behaves like LAN Ethernet port of networking switch.

 

Deco mesh does not like devices that have static IP address configured on them. There are very few types of devices which require configuration of IP address on device, but they do exist. As long as device can request IP address dynamically from the router, you should have no issues hardwiring it to Deco unit. You can set IP reservation for device in Deco app, if you need static IP address for device.

Mentioning that to cover all possibilities.

 

Recommended Solution
  2  
  2  
#2
Options
Re:Connect devices directly with ethernet cables with Deco Mesh routers
2024-03-11 22:11:05

  @Alexandre, thank you very much.

  0  
  0  
#3
Options
Re:Connect devices directly with ethernet cables with Deco Mesh routers
2024-03-12 11:26:48

  @cballock you could also buy pretty much any cheap WiFi extender with an ethernet port. The TP-Link AC1200 is much cheaper than a new Deco unit and would allow you to plug the wired device into the ethernet port, then use the AC1200 to connect to the Deco mesh network you already have. Depending on the speed required for the wired device you could spend more for a faster wifi connection too.

XE75 V1.0 3-pack / Wired backhaul / Router mode / UK
  0  
  0  
#4
Options
Re:Connect devices directly with ethernet cables with Deco Mesh routers
2024-03-12 12:02:32

  @Wrayman, great idea. Thank you very much!

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 1128

Replies: 4

Tags

Network Connectivity Deco Ethernet Backhaul Connection Preference
Related Articles
If i turn wifi off on router (using Deco X50 as mesh) can i still plug ethernet cables into router
198 0
Connecting Lan-cables to two different devices
120 0
connect all Deco to the modem directly
12085 0
using ethernet cables with x55
2002 0
Internet is not possible from segments other than the segment directly under the LAN port of BE85
143 1
Connect WiFi router directly to office vpn
1518 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.