VR1210V capped to 100mbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

VR1210V capped to 100mbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
VR1210V capped to 100mbps
VR1210V capped to 100mbps
2024-02-21 20:35:04
Model: Archer VR1210v  
Hardware Version:
Firmware Version:

Hello all

 

I have a problem with the maximum speed connection of my router capped at 100mbs

 

No issues with wifi, as I can reach download speed of 400/450mbs easily.

 

I tried different cables cat5e and cat6 and the PC is compatible with gigabit Ethernet 

 

I tried also to check on the settings of the router by I cannot find anything on the maximum speed 

 

Do you know I can I solve it?

 

Thanks 

Mattia 

  0      
  0      
#1
Options
6 Reply
Re:VR1210V capped to 100mbps
2024-02-21 22:04:57

  @Mattgalbiati 

 

These issues a usually cause d by a bad crimping/connectores or a faulty ethernet ports.

To rule out bad connectors or crimping use another device like a laptop to test the negotiated speed.

Also make sure that you're with the latest FW release for this modem router - here.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:VR1210V capped to 100mbps
2024-02-21 22:20:08

  @terziyski 

 

Thanks for the reply

I already tried different ports on the router with a laptop and different cables, so I think that the problem may be the firmware 

 

I'll update it and try again, will let you know if works

 

Thank you 

  0  
  0  
#3
Options
Re:VR1210V capped to 100mbps
2024-02-22 15:00:57

  @terziyski 

 

so I checked the firmware and it is updated to the latest version*
I tried again all the ports on the router with different CAT6 cables, but still capped at 100mbs 

 

here you can find a screenshot of the ethernet status on my PC

Seems that the speed (Velocità) is capped at 100 Mbps

 

here you can find a screenshot of the settings of the Ethernet controller port, where I selected "automatic negotiation"


I also tried to switch it to 2.5Gbps Full Duplex, but it is not working either 

 

Do you know what can I try to check to solve this issue?

Thanks 

 

  0  
  0  
#4
Options
Re:VR1210V capped to 100mbps
2024-02-22 15:17:29

  @Mattgalbiati 

 

Try with another PC or a laptop with ethernet port as I posted, to rule out bad connectors/crimping.

If the issue persists you can contact your local tech support for further troubleshooting.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#5
Options
Re:VR1210V capped to 100mbps
2024-02-23 11:50:23

  @terziyski 

 

I tried all the ethernet ports with different cables and PCs, but always the same issue 

 

at the end I returned the router and got a different model

after a 5 minutes setup here is the result 

 

At this point, I think that the issue was in the router 

 

Thank you very much for your help on this

  0  
  0  
#7
Options
Re:VR1210V capped to 100mbps
2024-02-23 12:31:21

  @Mattgalbiati 

 

In rare cases a faulty ethernet ports could cause this as I posted initially. Thanks for the feedback.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#8
Options

Information

Helpful: 0

Views: 662

Replies: 6

Related Articles