Home Network Community > All Threads > RE200 problems as Ap
< All Threads

RE200 problems as Ap

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

RE200 problems as Ap

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
RE200 problems as Ap
RE200 problems as Ap
2024-01-12 17:36:33 - last edited 2024-01-15 10:48:45
Tags: #Access Point Mode #Network Connectivity
Model: RE200  
Hardware Version: V3
Firmware Version: 4125

Hello, i was using the re200 for quite some time as an extender, trying to use it as a AP right now doesn't seem to work. I saw something about setting it up on the router but i have no idea how to. I can't connect to internet. I have a switch in my room and it seems everything is trying to go through the RE200. My pc looses connection when i try to connect it and is shown as in the addresses. When i came home it worked but i forgot my password and i had to reset the device. What should i do? 

 

Just to mention the setup is router > switch > re200

 

I'm also trying to find how to not make it as a dhcp on my switch. If there's anything to do to turn it off I'd love to try it. Just want to use it as an AP 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:RE200 problems as Ap-Solution
2024-01-13 10:11:37 - last edited 2024-01-15 10:48:45

  @Zatara 

 

When RE200 is configured in AP mode you have to disable its DHCP server. In this mode your devices will receive their IP addresses from your main router.

Here's a guide on how to setup RE200 in AP mode.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
8 Reply
Re:RE200 problems as Ap-Solution
2024-01-13 10:11:37 - last edited 2024-01-15 10:48:45

  @Zatara 

 

When RE200 is configured in AP mode you have to disable its DHCP server. In this mode your devices will receive their IP addresses from your main router.

Here's a guide on how to setup RE200 in AP mode.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
Re:RE200 problems as Ap
2024-01-15 18:48:03

  @terziyski 

 

Hello! I tried looking in settings but i found no DHCP settings at all. That's what tripped me out tbh. Everyone's mentioning them but i had none

  0  
  0  
#3
Options
Re:RE200 problems as Ap
2024-01-15 19:11:05

  @Zatara 

 

RE200 DHCP server settings should be under Settings > Network > DHCP Server:

 

Do you have this setting in your RE200 WebGUI ? This DHCP server should be turned off when RE200 is in AP mode.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options
Re:RE200 problems as Ap
2024-01-16 18:47:03

  @terziyski 

 

Nop I don't have that been trying to find it but no luck don't see it in any menu. In Network i have default gateway subnet mask primary\secondary dns, no dhcp settings at all. I kept googling and everyone points to that but i don't see anyone with the RE200 

  0  
  0  
#5
Options
Re:RE200 problems as Ap
2024-01-16 18:51:55

  @terziyski 

 

I see this old thing aswell

 

https://community.tp-link.com/en/home/forum/topic/192368

 

But that's old firmware w others same problem 

  0  
  0  
#6
Options
Re:RE200 problems as Ap
2024-01-17 10:28:10

Zatara wrote

Hello, i was using the re200 for quite some time as an extender, trying to use it as a AP right now doesn't seem to work. I saw something about setting it up on the router but i have no idea how to. I can't connect to internet. I have a switch in my room and it seems everything is trying to go through the RE200. My pc looses connection when i try to connect it and is shown as in the addresses. When i came home it worked but i forgot my password and i had to reset the device. What should i do? 

 

Just to mention the setup is router > switch > re200

 

I'm also trying to find how to not make it as a dhcp on my switch. If there's anything to do to turn it off I'd love to try it. Just want to use it as an AP 

Ki  @Zatara 

  0  
  0  
#7
Options
Re:RE200 problems as Ap
2024-01-17 11:03:11

  @AboFahad171 ki?

  0  
  0  
#8
Options
Re:RE200 problems as Ap
2024-01-17 11:41:37

  @Zatara 

 

Zatara wrote

  @terziyski 

 

I see this old thing aswell

 

https://community.tp-link.com/en/home/forum/topic/192368

 

But that's old firmware w others same problem 

You could try this FW and check if you can disable RE200 DHCP server to resolve your issue.

There shouldn't be any problem to revert back to your current FW release if this doesn't work for you.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#9
Options

Information

Helpful: 0

Views: 803

Replies: 8

Tags

Access Point Mode Network Connectivity
Related Articles
Troubleshooting with RE200
604 1
Problemas com o meu Repetidor RE200
3356 12
RE200 in AP Mode Stops Accepting Passwords from WiFi Clients
831 2
Extender RE200 access point mode no more than 100MB
959 0
WiFi Range Extender RE200 not working.
1680 4
Range Extender RE200 connected but no internet
421 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.