Dropping BT connection AX3000

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Dropping BT connection AX3000

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Dropping BT connection AX3000
Dropping BT connection AX3000
2024-01-04 07:50:00 - last edited 2024-01-31 07:50:02
Model: Archer AX53  
Hardware Version: V1
Firmware Version: 1.2.2

Hi everyone,

 

My new AX3000 Archer AX53 will connect to the internet via the BT fast Fibre connection already installed in my home for a few hours before losing connection and getting an orange  light on the router.

 

If I switch the router off and on it reconnects but it keeps happening every few hours.

 

What's going on? 
 

Thanks 

 

James

  1      
  1      
#1
Options
1 Accepted Solution
Re:Dropping BT connection AX3000-Solution
2024-01-05 19:58:41 - last edited 2024-01-31 07:50:02

  @Bogle thanks so much for the reply.

 

So the router is not too hot and in a position away from interference. I had used the cable BT had originally sent for their router. I have since swapped to the included cable that came with the Archer and the connection hasn't dropped once (48 hours) - quick and easy fix. 👍

Recommended Solution
  0  
  0  
#4
Options
4 Reply
Re:Dropping BT connection AX3000
2024-01-04 10:20:40 - last edited 2024-01-04 10:21:43

It might be BT kicking you off, I assume you're using FTTP with an ONT on the wall? if so the installs sometimes don't play nice with 3rd party equipment, I'd ask BT to do a line check first so see when it happens, also check the usual suspects 1 - Too hot a router so place it where it can breath better & 2 - wifi interference so make sure it's away from microwaves and other wireless devices you may have in the home, also check it's not something like a cctv camera or a search assistant product causing it assuming you use either, this is process of elimination so start testing by removing one device at a time from your network, if it stops terminating the connection you've found your culprit, hth.

  1  
  1  
#2
Options
Re:Dropping BT connection AX3000
2024-01-04 10:40:29 - last edited 2024-01-08 05:35:56

  @James335 

Too hot a router so place it where it can breath better & 2 - wifi interference so make sure it's away from microwaves and other wireless devices you may have in the home, also check it's not something like a cctv camera or a search assistant product causing it assuming you use either, this is process of elimination.

https://community.tp-link.com/en/home/forum/topic/649256

Regards Chitra Mishra
  1  
  1  
#3
Options
Re:Dropping BT connection AX3000-Solution
2024-01-05 19:58:41 - last edited 2024-01-31 07:50:02

  @Bogle thanks so much for the reply.

 

So the router is not too hot and in a position away from interference. I had used the cable BT had originally sent for their router. I have since swapped to the included cable that came with the Archer and the connection hasn't dropped once (48 hours) - quick and easy fix. 👍

Recommended Solution
  0  
  0  
#4
Options
Re:Dropping BT connection AX3000
2024-01-06 11:54:25

  @James335 

 

Cheers for coming back to say what fixed it, I did suggest a different cable in another persons thread but forgot to include it here as a possibility, glad you got it sorted, sometimes the cable doesn't always connect fully as well (at either end) or a certain LAN port for whatever reason doesn't activate but will after a re-boot, there's loads of silly reasons people get problems with & the best way is to always rule out the simple things first.

  0  
  0  
#5
Options

Information

Helpful: 1

Views: 639

Replies: 4

Related Articles