Home Network Community > All Threads > Deco BE85 connect to switch
< All Threads

Deco BE85 connect to switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco BE85 connect to switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco BE85 connect to switch
Deco BE85 connect to switch
2023-12-27 12:09:14
Model: Deco BE85  
Hardware Version: V1
Firmware Version: 1.0.14

Hi  
I'm using Deco BE85 and the Switch is TP-LINK TL-SH1832 (24 Port*2.5GE & 8 Port*SFP+). Deco BE85 lan ports 10gbps or sfp+ will connect to
TL-SH1832 switch and hook to sfp+ port 32. Can i get the internet connection from the port 1 to 31, Thanks for reply.
 

  0      
 
  0      
 
#1
Options
4 Reply
Re:Deco BE85 connect to switch
2023-12-28 06:36:27

  @kch933 

Hi, welcome to the community.

Would your network layout look like this:

Can I have the model numbers of your SFP fiber module?

You should be able to get internet connection from port 1 to 31.

Wait for your reply and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Deco BE85 connect to switch
2023-12-28 07:45:16

  @kch933 

Hi
The brands is 10Gtek(TP-LINK) 10Gbase-T RJ-45 30m

  0  
  0  
#3
Options
Re:Deco BE85 connect to switch
2024-01-03 09:28:44

  @kch933 

Thank you very much for the time and patience.

These devices should work well with each other.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
  0  
  0  
#4
Options
Re:Deco BE85 connect to switch
2024-01-17 00:18:26

I don't think this is accurate - The design

 

From my understanding and reading the manuals the bottom 10G port works either on Fibre OR Copper but they are not 2 ports. Meaning that in the diagram shown you have the ISP connection and the LAN switch connection on the same port and this will not work.

 

Try moving one of the connections to the top 10G port 

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 972

Replies: 4

Related Articles
Deco BE85 keeps restarting on its own!
1966 3
Deco BE85 randomly restarts
708 1
Deco BE85 can not switch to Access Point Mode
1066 1
Can HB810 Pair With Deco Be85?
315 0
Deco BE85 VPN client not working
507 0
Deco BE85 wifi settings question (MLO)
360 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.