BE85 SFP+ does support 1G SFP?
I want to know whether SEP+ port supports 1GBase SFP or not.
Is there any information about this?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, welcome to the community.
As for the 1GBase SFP receiver, do you refer to a 1000BASE-T SFP Copper RJ-45 receiver or 1000Base-LX/LH SFP Transceiver?
If it is 1000BASE-T SFP Copper RJ-45, I think it might be a waste since there are already 2.5G Ethernet ports on the BE85 if you want to connect a 1G/s switch.
While if it is 1000Base-LX/LH, I googled a little bit and typically, it is supposed to be connected with a 10G module. In fact, it can also be connected to a 1G Base receiver if necessary. This is attributed to its backward compatible design. If you could wait for a while, I could double-check with the engineers for further details.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Thank you for your comment.
l plan to use 1G GPON SFP module, which is an optical transceiver.
I can wait for further detail information for 2 weeks before get my BE85 and an communication line.
Thanks.
- Copy Link
- Report Inappropriate Content
Hi, the engineer said yes and the 10G SFP does work with the 1G optical transceiver. Thanks for your patience.
He also provides several optical modules they have tested compatible for your reference:
TL-SM311LSv4
TL-SM321Av3
TL-SM321Bv3
TL-SM321A-2v1
TL-SM321B-2v1
TL-SM311LSv4.20
TL-SM321Av3.20
TL-SM321Bv3.20
TL-SM321A-2v1.20
TL-SM321B-2v1.20
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 631
Replies: 3
Voters 0
No one has voted for it yet.