Loads of system log entries with log type ERROR
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Good day, everyone. I've just inspected the logs of my Deco X50-5G router and found out that there are tons of logs with ERROR severity which I don't know how to react to, because I don't get their meaning. I'm a softwared developer by myself and I think ERROR severity logs should not be ignored. You can find a sample of errors which I've extracted from logs below. Could you please help me to somehow fix them?
Some kind of failure to set up the name (note: I've replaced the actual sim card number with [SENSITIVE DATA])
Tue Nov 14 15:23:11 2023 user.err : [mobile] [UpdateNetName] Set net name by plmn long name, net_name=o2 - de
Tue Nov 14 15:23:11 2023 user.err : [mobile] [uim_parse_gw_iccid] ICCID[0] src= [SEINSITIVE INFORMATION]
Tue Nov 14 15:23:11 2023 user.err : [mobile] [uim_parse_gw_iccid] ICCID[1] src= [SEINSITIVE INFORMATION]
Tue Nov 14 15:23:11 2023 user.err : [mobile] [uim_parse_gw_iccid] ICCID[2] src= [SEINSITIVE INFORMATION]
Tue Nov 14 15:23:11 2023 user.err : [mobile] [uim_parse_gw_iccid] ICCID[3] src= [SEINSITIVE INFORMATION]
Tue Nov 14 15:23:11 2023 user.err : [mobile] [uim_parse_gw_iccid] ICCID[4] src= [SEINSITIVE INFORMATION]
Tue Nov 14 15:23:11 2023 user.err : [mobile] [uim_parse_gw_iccid] ICCID[5] src= [SEINSITIVE INFORMATION]
Tue Nov 14 15:23:11 2023 user.err : [mobile] [uim_parse_gw_iccid] ICCID[6] src= [SEINSITIVE INFORMATION]
Tue Nov 14 15:23:11 2023 user.err : [mobile] [uim_parse_gw_iccid] ICCID[7] src= [SEINSITIVE INFORMATION]
Tue Nov 14 15:23:11 2023 user.err : [mobile] [uim_parse_gw_iccid] ICCID[8] src= [SEINSITIVE INFORMATION]
Tue Nov 14 15:23:11 2023 user.err : [mobile] [uim_parse_gw_iccid] ICCID[9] src= [SEINSITIVE INFORMATION]
Tue Nov 14 15:23:11 2023 user.err : [mobile] [GetSimICCID] iccid str len=20, str=[SEINSITIVE INFORMATION]
Tue Nov 14 15:23:11 2023 user.err : [mobile] [UpdateIspProfiles] spn: , long_eons: o2 - de, short_eons: o2 - de
Tue Nov 14 15:23:11 2023 user.err : [mobile] [UpdateNetName] Set net name by plmn long name, net_name=o2 - de
Tue Nov 14 15:23:11 2023 user.err : [mobile] [DebugThreadStackSize] Memory status statistic file open failed.
Another failure is about some fan controls
Tue Nov 14 15:23:12 2023 user.err : [fan-control]:at_cmd = :simplecom -c at+qtemp
Tue Nov 14 15:23:12 2023 user.err : [fan-control]:atResp = :at+qtemp
+QTEMP:"modem-lte-sub6-pa1","57"
+QTEMP:"modem-sdr0-pa0","0"
+QTEMP:"modem-sdr0-pa1","0"
+QTEMP:"modem-sdr0-pa2","0"
+QTEMP:"modem-sdr1-pa0","0"
+QTEMP:"modem-sdr1-pa1","0"
+QTEMP:"modem-sdr1-pa2","0"
+QTEMP:"modem-mmw0","0"
+QTEMP:"aoss-0-usr","59"
+QTEMP:"cpuss-0-usr","60"
+QTEMP:"mdmq6-0-usr","59"
+QTEMP:"mdmss-0-usr","59"
+QTEMP:"mdmss-1-usr","58"
+QTEMP:"mdmss-2-usr","59"
+QTEMP:"mdmss-3-usr","58"
+QTEMP:"modem-lte-sTue Nov 14 15:23:12 2023 user.err : [fan-control]:paMaxTemp = :57
Tue Nov 14 15:23:12 2023 user.err : [fan-control]:mdmMaxTemp = :59
Tue Nov 14 15:23:12 2023 user.err : [fan-control]:wifi0Temp = :74
Tue Nov 14 15:23:12 2023 user.err : [fan-control]:wifi1Temp = :63
Tue Nov 14 15:23:12 2023 user.err : [fan-control]:fan_status = :0
Tue Nov 14 15:23:12 2023 user.err : [fan-control]:closed->closed
Tue Nov 14 15:23:12 2023 user.err : [fan-control]:fan zero
And yet another failure regarding the bandwidth
Tue Nov 14 15:23:38 2023 daemon.err bandwidth_contr: get mode: 11AHE160
Tue Nov 14 15:23:38 2023 daemon.err nrd[31862]: wlanifMapToBandwidth: Invalid bandwidth from driver: 3
Is the SIM Carrier O2?
Yes, my sim card is from O2
Have you noticed any performance issues on the devices when they are connected to Deco X50-5G? It might help to understand the attached system logs.
I can not say that I have any kind of persistent performance issues with any of my devices. Main issue for me is the connection stability: my internet just goes away from time to time, that usually happens couple of times per day. When it happens Deco blinks red and shows that there is no connection. As I can not guarantee my signal strength to be stable, I don't know if it is an issue with a device or it's just some signal strength related problem.
I also have relatively long pings, but I assume it's more like a carier problem.
