Home Network Community > All Threads > Loads of errors in log. Deco M4
< All Threads

Loads of errors in log. Deco M4

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Loads of errors in log. Deco M4

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Loads of errors in log. Deco M4
Loads of errors in log. Deco M4
2020-07-20 16:01:37 - last edited 2021-09-03 03:44:55
Model: Deco M4  
Hardware Version:
Firmware Version: 1.1.8 Build 20190917 Rel. 76172

Hi,

Im having lots of errors in my main deco.

Where can i learn about the errors?

Here's some examples:

 

Mon Jul 20 16:18:09 2020 daemon.err nrd[943]: estimatorCmnHandleBeaconReportEvent: Beacon report for STA 40:9C:28:9C:A7:26 in unexpected state 2
Mon Jul 20 16:18:12 2020 daemon.err nrd[943]: estimatorHandleValidBeaconReport: No local BSS reported in beacon report from 28:39:26:7A:B4:01
Mon Jul 20 16:18:12 2020 daemon.err nrd[943]: estimatorCmnHandleBeaconReportEvent: Invalid beacon report for D0:37:45:81:83:A4
Mon Jul 20 16:18:15 2020 daemon.err nrd[943]: estimatorCmnHandleBeaconReportEvent: Beacon report for STA 40:9C:28:9C:A7:26 in unexpected state 2
Mon Jul 20 16:18:18 2020 daemon.err nrd[943]: estimatorCmnHandleBeaconReportEvent: Invalid beacon report for 28:39:26:7A:B4:01
Mon Jul 20 16:18:21 2020 daemon.err nrd[943]: estimatorCmnHandleBeaconReportEvent: Beacon report for STA 40:9C:28:9C:A7:26 in unexpected state 2
Mon Jul 20 16:18:22 2020 daemon.err udhcpd[4864]: Sending ACK to 10.0.0.27
Mon Jul 20 16:18:22 2020 daemon.err udhcpd[4864]: clear ip a00001b
Mon Jul 20 16:18:22 2020 daemon.err udhcpd[4864]: Sending ACK to 10.0.0.27
Mon Jul 20 16:18:22 2020 daemon.err udhcpd[4864]: clear ip a00001b
Mon Jul 20 16:18:24 2020 daemon.err nrd[943]: estimatorHandleValidBeaconReport: No local BSS reported in beacon report from 28:39:26:7A:B4:01
Mon Jul 20 16:18:30 2020 daemon.err nrd[943]: estimatorDot11kIterateCB: Timeout waiting for 802.11k response from 40:9C:28:9C:A7:26
Mon Jul 20 16:18:30 2020 daemon.err nrd[943]: estimatorCmnHandleBeaconReportEvent: Invalid beacon report for 28:39:26:7A:B4:01
Mon Jul 20 16:18:30 2020 daemon.err client_mgmt: wireless client associate or disassociate.
Mon Jul 20 16:18:30 2020 daemon.err client_mgmt: client_mac:40-9C-28-9C-A7-26, client_ifname:ath1, client_action:associate
Mon Jul 20 16:18:30 2020 daemon.err client_mgmt: client(40-9C-28-9C-A7-26) assocaite by if(ath1).
Mon Jul 20 16:18:30 2020 daemon.err client_mgmt: wireless client associate or disassociate.
Mon Jul 20 16:18:30 2020 daemon.err client_mgmt: client_mac:40-9C-28-9C-A7-26, client_ifname:ath0, client_action:disassociate
Mon Jul 20 16:18:30 2020 daemon.err client_mgmt: client(40-9C-28-9C-A7-26) disassocaite by if(ath0).

 

Setup: The main deco is acting as a router. It is connected with cable to a switch. From the switch two slave-decos are connected with cable.

 

Thanks for helping, Magne

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Loads of errors in log. Deco M4-Solution
2021-09-02 13:40:58 - last edited 2021-09-03 03:44:55

@magne 

Confirmed. Disabling Fast Roaming gets rid of the error messages.

It also improves pingspeed dramaticly. Enables resulted in 33% packet loss on my M4S system.

It also cured a problem I had with my laptop that couldnt find/ping the TP-Link TL-R605 Router resulting in not having a DNS resolve.

Recommended Solution
  1  
  1  
#7
Options
6 Reply
Re:Loads of errors in log. Deco M4
2020-07-21 05:49:42

@magne 

 

Hello,

 

For the daemon.err log display issue, it is normal and shows the status of the activities of the Deco devices.

 

Do you encounter any issue with the Deco M4 network? If yes, please confirm some basic info so that we can speed up the whole process and offer a solution:

 

1. What is the model number of the switch in your network? Is the main Deco M4 working as router and the other two as Access Points?

 

2. Is there any issue with the Deco network? How about the LED status on the three M4s?

 

Thanks.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Loads of errors in log. Deco M4
2020-07-28 08:23:53

 

TP-Link_Deco wrote

@magne 

 

Hello,

 

For the daemon.err log display issue, it is normal and shows the status of the activities of the Deco devices.

 

Do you encounter any issue with the Deco M4 network? If yes, please confirm some basic info so that we can speed up the whole process and offer a solution:

 

1. What is the model number of the switch in your network? Is the main Deco M4 working as router and the other two as Access Points?

 

2. Is there any issue with the Deco network? How about the LED status on the three M4s?

 

Thanks.

@TP-Link_Deco 

 

Thanks for answering me.

I am not sure if I am having issues with the network. It is sometimes unstable, but so are most wifi? My thought was that the wifi could perhaps perform better if I fixed the errors in the log.

 

You are saying that the errors are not errors. Then, what ARE errors, what is the point in filtering the log like this: ?

 

Do you have any resource explaing the meaning of log entries? That would be helpful.

 

Anyway My setup is:

The main deco is acting as a router. It is connected with cable to a switch. From the switch two slave-decos are connected with cable.

Solid white led on all tree decos. The switch is an netgear wndr3700v4 (fw, dhcp, wifi,filtering are all disabled making it transparent and dumb)

 

Couple of days ago i upgraded to the new fw 1.4.0 Build 20200628 Rel. 48846.

Attached is the newest log. Does it seems normal?

 

Best regards Magne.

 

 

File:
main deco log-2020-07-28.logDownload
  1  
  1  
#3
Options
Re:Loads of errors in log. Deco M4
2021-04-09 19:41:40

@magne - I have a very similar setup and have started experiencing unstable newtork performance.  I have 3 Deco S4 set up with the main one connected to the router, then to a Netgear switch and the other two Deco wired to the switch as satellites.

 

My network seems to stall for a few minutes (wifi connections are ok but no internet access) then access is re-established.  When I check the logs, I get critical errors:

 

Fri Apr 9 18:54:10 2021 user.emerg syslog: tp211,501[29063]:

Fri Apr 9 18:54:15 2021 user.emerg syslog: tp211,501[29659]:

Fri Apr 9 18:54:16 2021 user.emerg syslog: tp211,501[29659]:

Fri Apr 9 18:54:19 2021 user.emerg syslog: tp217,505[30180]:

Fri Apr 9 18:54:20 2021 user.emerg syslog: tp217,504[30180]:

Fri Apr 9 18:54:25 2021 user.emerg syslog: tp211,21[29659]: FTP

Fri Apr 9 18:54:25 2021 user.emerg syslog: tp211,21[29659]: TFTP

Fri Apr 9 18:54:25 2021 user.emerg syslog: tp211,21[29659]: H323

Fri Apr 9 18:54:25 2021 user.emerg syslog: tp211,21[29659]: RTSP

Fri Apr 9 18:54:25 2021 user.emerg syslog: tp211,21[29659]: SIP

Fri Apr 9 18:54:25 2021 user.emerg syslog: tp211,21[29659]: PPTP

Fri Apr 9 18:54:26 2021 user.emerg syslog: tp211,21[29659]: L2TP

Fri Apr 9 18:54:26 2021 user.emerg syslog: tp211,21[29659]: IPSEC

Fri Apr 9 18:54:29 2021 user.emerg syslog: tp279,508[30894]:

Fri Apr 9 18:54:34 2021 user.emerg syslog: tp211,501[30942]:

Fri Apr 9 18:54:37 2021 user.emerg syslog: tp211,501[30942]:

Fri Apr 9 18:54:42 2021 user.emerg syslog: tp217,505[31861]:

Fri Apr 9 18:54:44 2021 user.emerg syslog: tp217,504[31861]:

Fri Apr 9 18:54:47 2021 user.emerg syslog: tp211,21[30942]: FTP

Fri Apr 9 18:54:47 2021 user.emerg syslog: tp211,21[30942]: TFTP

Fri Apr 9 18:54:47 2021 user.emerg syslog: tp211,21[30942]: H323

Fri Apr 9 18:54:47 2021 user.emerg syslog: tp211,21[30942]: RTSP

Fri Apr 9 18:54:47 2021 user.emerg syslog: tp211,21[30942]: SIP

Fri Apr 9 18:54:47 2021 user.emerg syslog: tp211,21[30942]: PPTP

Fri Apr 9 18:54:47 2021 user.emerg syslog: tp211,21[30942]: L2TP

Fri Apr 9 18:54:47 2021 user.emerg syslog: tp211,21[30942]: IPSEC

Fri Apr 9 18:54:48 2021 user.emerg syslog: tp279,508[32261]:

 

I've tried to get Tp-Link support but the only suggestion so far was to change one of the satellites to be the main device and swap them about.  I've done this but still getting the errors (and interrupted connection)

 

@TP-Link_Deco - would be very grateful if you could shine a light on the problem and how to solve it.

  0  
  0  
#4
Options
Re:Loads of errors in log. Deco M4
2021-04-10 09:00:07

@Gfire I dont know what your errors means.

 

But one thing you could check, do you have the common ping problem many deco owners have? The problem is that every 10 sec the ping latency goes up to about 1000ms. Making surfing slow and playing online useless.

 

try pinging the router every second for 5 minutes. The latency should always be less than 1ms.

 

(i fixed my ping problem by disable fast roaming. The fast roaming is not much faster anyway.)

  1  
  1  
#5
Options
Re:Loads of errors in log. Deco M4
2021-04-28 17:01:43

I think its resonable for TP-link to provide a resouce to advanced users on the erros within the logs mean and what steps could possibly be taken to reslove said errors.   

 

TP-LINK SUPPORT CAN YOU PLEASE PROVIDE THIS?

  1  
  1  
#6
Options
Re:Loads of errors in log. Deco M4-Solution
2021-09-02 13:40:58 - last edited 2021-09-03 03:44:55

@magne 

Confirmed. Disabling Fast Roaming gets rid of the error messages.

It also improves pingspeed dramaticly. Enables resulted in 33% packet loss on my M4S system.

It also cured a problem I had with my laptop that couldnt find/ping the TP-Link TL-R605 Router resulting in not having a DNS resolve.

Recommended Solution
  1  
  1  
#7
Options

Information

Helpful: 0

Views: 7225

Replies: 6

Related Articles
incomprehensive problem with Deco M4 : errors messages in log
3594 0
Deco M4 loads some pages/apps really SLOW!
377 0
Loads of warnings/errors in logs
666 0
Message in log Deco M4
757 3
Loads of system log entries with log type ERROR
811 0
Several log errors on deco m5
1393 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.