Tether password showing incorrect

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Tether password showing incorrect

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Tether password showing incorrect
Tether password showing incorrect
2023-11-09 18:37:56 - last edited 2023-12-05 12:53:29
Model: Archer C6  
Hardware Version: V1
Firmware Version:

Unable to change theter paswrd showing incorrect pass

  0      
  0      
#1
Options
1 Accepted Solution
Re:Tether password showing incorrect -Solution
2023-11-09 19:05:15 - last edited 2023-12-05 12:53:29

  @Fauzan007 

 

Note that when dealing with Tether there are always two different passwords. 

 

One of them is the password of your TP-Link ID account that you need to enter after you've opened the Tether app for the first time.

 

The other password is the password of the Archer C6. This is the password that needs to be entered when you tap on the entry "Archer C6" in the My Devices list of the Tether app for the first time.

Recommended Solution
  0  
  0  
#2
Options
5 Reply
Re:Tether password showing incorrect -Solution
2023-11-09 19:05:15 - last edited 2023-12-05 12:53:29

  @Fauzan007 

 

Note that when dealing with Tether there are always two different passwords. 

 

One of them is the password of your TP-Link ID account that you need to enter after you've opened the Tether app for the first time.

 

The other password is the password of the Archer C6. This is the password that needs to be entered when you tap on the entry "Archer C6" in the My Devices list of the Tether app for the first time.

Recommended Solution
  0  
  0  
#2
Options
Re:Tether password showing incorrect
2023-11-10 14:43:47

  @woozle archerc6 password is showing incorrect and i am not able to reset. Could you help me on this.

  0  
  0  
#3
Options
Re:Tether password showing incorrect
2023-11-10 19:09:08

  @Fauzan007 

 

If you can't recall the password of your Archer C6, then you need to reset the whole router to default settings by pressing the small recessed button labelled "RESET" that is located near the Ethernet ports.
Press and hold that button for at least 5 seconds, until you see some distinct response from the router's LED lights.

 

Note that this will reset all of the router's internal settings, not just the password.

 

  0  
  0  
#4
Options
Re:Tether password showing incorrect
2023-11-11 14:32:33

  @woozle after doing this do i need to configure my router again or it'll work normally with my wifi passw

  0  
  0  
#5
Options
Re:Tether password showing incorrect
2023-11-11 15:02:23

  @Fauzan007 

 

Yes, after the reset the whole configuration of the router will be lost and you have to configure the router again, just like if this was a new router.

 

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 806

Replies: 5

Related Articles